AquaSignal® Series 25

AquaSignal® Series 40

Davis Mega Light®

Anchor Lights

Incredibly low current draw, an unheard of 80 ma.* (.08 amps)!! Compare this to other LED lights of equal brightness that draw 260 ma (.26 amps). This is an almost 70% drop in current draw!!

It’s modular design allows you to retrofit your existing all-round light into an ultra high-efficiency LED light, at a very low cost. Or purchase a fully assembled AquaSignal® light.

You have the option to make your light fully automatic, on at dusk and off at dawn, whether you build your own or purchase one already assembled.

If you purchase an all-round light with the automatic feature, please note that it is packed with four more features, other than automatically turning on your light at dusk and off at dawn. These features are controlled by your existing anchor light switch. No extra wires to install!!

Here's what your anchor light switch will do now:

1. Turn your switch on and the all-round light will turn on at dusk and off at dawn.
2. Turn your switch on two times and your light will turn on regardless of light condition.
3. *Turn your switch on three times and your all-round light will slow flash.
   
4. *Turn your switch on four times and your all-round light will fast flash.
5. *Turn your switch on five times and your all-round light will flash the SOS signal.
   

NOTE: After turning your switch on for any of the five features listed above, there will be a five second delay before light responds. If you are confused as to the amount of times you turned the switch on and off, then leave the switch on for five seconds, turn it off momentarily and start over. It is your responsibility to be aware of USCG rules and regulations concerning flashing all-round lights.

ALSO NOTE: THIS IS A RETROFIT ALL-ROUND LIGHT AND IS NOT USCG CERTIFIED.