Install Flexofold Prop in About 15 Minutes

Install Flexofold Prop is a short note for sailors who like upgrades that are simple, tidy, and worth doing right the first time.

The easy 15-minute installation of a Flexofold propeller makes upgrading to a low-drag high-performance folding propeller a breeze.  

Get a quick recommendation and a quote for the right prop using our online Spec-O-Prop form

Before you start

Install Flexofold Prop jobs go smoothly when the prop is already matched to the boat, engine, shaft or saildrive, and the way you actually use the boat. The quick part is the mechanical install. The important part is confirming the size, rotation, blade count, and hardware before you are standing beside the boat with tools in hand.

A sailor can usually understand the basic job at a glance: clean the mounting area, check the fit, follow the supplied instructions, use the correct locking parts, and make sure everything moves freely before launch. Do not improvise on the underwater hardware. If the boat has a zinc, spacer, saildrive, or shaft detail that looks unusual, stop and ask before forcing anything.

The Spec-O-Prop form is there because the details matter more than a guess from a photo. Send the boat and engine information, and we can help point you toward the Flexofold setup that makes sense for your hull instead of treating every boat the same.

Before launch, turn the blades by hand, check that the fasteners and locking parts are where the instructions say they should be, and keep the paperwork with the boat records. Install Flexofold Prop work is not hard, but underwater hardware deserves a second look before the boat goes back in.

One more sailor-to-sailor note: take a photo before and after the job, especially if the boat is hauled out away from home. It gives you something useful to compare later if you are checking anodes, ordering spare parts, or asking a question from a boatyard. Install Flexofold Prop work is simple enough, but clear records make the next haulout easier.